Product Classification Results Page

Product classification

Encoder E01

¥ 0.00

Buy now
R39 -Flexible Probe Scanner

1, Bend to fit the workpiece surface, axial thickness of 3-4mm, can be
placed inside the pipeline for internal inspection
2, Pipe and steel corrosion inspection, can be used for different diameters
3, Other complex geometric artifacts
4, It can measure and image the workpiece
5, Simple structure, quick disassembly, convenient installation
6, Support encoder scan, quick disassembly, easy installation

¥ 0.00

Buy now
R32 Blade flexible scanner- Transducer & Semi - Water Scanning Rack

Wind power detection probe and semi-water scanning rack module can be customized, welcome to consult.

¥ 0.00

Buy now
R32 Blade flexible scanner

1, It is mainly used to detect the defects of wind turbine blades
2, the probe is segmented flexible probe, each group is independent, can adapt to different curvature surface fitting
3, the lower shell of the probe is inlaid with stainless steel ball, reducing the friction with the workpiece to reduce wear
4, Ensure the consistency and stability of the water layer thickness at each position of the probe on the surface
5, with water recovery device, recycling

¥ 0.00

Buy now
R30 Pipeline Scanner

1, R30 is an electric scanner, used for automatic pipe ring seam scanning.
2, The curvature of scanner is adjustable, by adjusting the curvature can be adapted to 12-45 inch pipe diameter pipe.
3, The scanner can be installed with up to four probes, and the probe position is adjustable on the guide rod.
4, The clamping frame for installing the probe is simple in structure and convenient for disassembly and assembly.
5, Support encoder scanning, quick disassembly, easy installation.

¥ 0.00

Buy now
R29 - Variable Diameter Rod Scanner

1, Suitable for flange pipeline crack detection, and must be used with crawler
2, Adjustable, by adjusting the curvature can be adapted to 1m-2m flange pipe diameter
3, Can be installed with up to three probes, and the probe position is adjustable on the bracket rod
4, Support encoder scanning, quick disassembly, easy installation
5, The size of each support rod can be customized according to the detection condition

¥ 0.00

Buy now
R23 - Rod scanner

1, R23 with magnetic wheel, support to detect pipeline weld or flat plate weld
2, The scanner can be installed with up to four probes, and the probe position can be on the bracket rod
3, The clamping arm is convenient for disassembly and assembly on the side
4, Support encoder scan, quick disassembly, easy installation
5, It can choose different sizes of rod support according to the working condition

¥ 0.00

Buy now
R22 - Tofd mirco scanner

1. TOFD probe detection for pipe and plate welds
2. Simple structure, convenient disassembly and assembly, elastic clamping and hand-held operation
3. One main pipe is divided into two branch pipes, which are suspended and portable
4. The angle of the main support is adjustable, and the angle range is 14 ° - 290 °
5. Detection range of probe center distance: 19-156mm
6. The clamping width can be customized and increased as required

¥ 0.00

Buy now
R21 - Mirco rod scanner R21

1, The scanner is lightweight in structure and supports the detection of pipeline welds or flat plate welds
2, The scanner can be installed with two TOFD probes, and the probe position is adjustable on the support rod
3, The clamping arm is convenient for disassembly and assembly at the side
4, Different sizes of rod supports can be selected according to the working conditions

¥ 0.00

Buy now

Tell：+971547095555
Email：info@tnxmde.com
Phone：+97167449990
Address：B.C 130174, Ajman Free Zone, Ajman, United Arab Emirates

끸

Submit

Quick link

Online form

ZHONG YI

M2

Scanner

Wedge

Couplant Feed Unit

Probe

Encoder E01

R39 -Flexible Probe Scanner

R32 Blade flexible scanner- Transducer & Semi - Water Scanning Rack

R32 Blade flexible scanner

R30 Pipeline Scanner

R29 - Variable Diameter Rod Scanner

R23 - Rod scanner

R22 - Tofd mirco scanner

R21 - Mirco rod scanner R21